紀要論文

部分安定化ジルコニアの応力誘起変態高靭化に及ぼす強化添加剤の影響

EFFECT OF REINFORCING ADDITIVES ON STRESS-INDUCED TRANSFORMATION TOUGHENING OF PARTIALLY STABILIZED ZIRCONIA.

jpn

24368083

https://doi.org/10.15002/00025274

法政大学大学院理工学研究科

法政大学大学院紀要. 理工学研究科編

63

1

7

2022-03-24

Version of Record

Ceramics / metal functionally graded materials (FGMs) have been attracting much attention as composite materials that are intended for application to high-temperature structures. This study fucuses on toughening of ceramics and their matrix composites, which are building blocks of the FGMs. Partially stabilized zirconia (PSZ) with toughening additives such as Ni particles, Inconel fibers, SiC particles, SiC whiskers and a-alumina (Al_2O_3) particles were fabricated by spark plasma sintering (SPS). Toughening mechanisms were investigated based on their micro and macro-scale mechanical properties and microstructures. Disk bending tests, producing balanced biaxial loading conditions, were conducted probing bending strength at macro scales, while Vickers hardness tests were carried out to estimate fracture toughness and examine toughening mechanisms at micro scales. In addition, using a nanoindentation tester, hardness, elastic modulus, and creep properties were investigated at elevated temperatures (RT and 300℃). The results demonstrated that toughness of ZrO_2 increased by adding Ni particles, Inconel fibers and Al_2O_3 particles. Addition of Al_2O_3 particles highly enhanced disk bending strength and deformability.

Article