ようこそ ゲスト さん
ログイン
入力補助
English
カテゴリ
インデックスツリー
ランキング
アクセスランキング
ダウンロードランキング
その他
法政大学
法政大学図書館
インデックスツリー
資料タイプ別
学術雑誌論文
人文科学
社会科学
自然科学
このアイテムのアクセス数:
86
件
(
2025-07-08
14:21 集計
)
Permalink : https://hdl.handle.net/10114/3543
閲覧可能ファイル
ファイル
フォーマット
サイズ
閲覧回数
説明
MatSci2005_54_12_1301
pdf
957 KB
506
論文情報
ファイル出力
アイテムタイプ
学術雑誌論文
タイトル
6061アルミニウム合金の高ひずみ速度域における粘性抵抗を考慮した変形応力のひずみ速度依存性
その他のタイトル
Strain Rate Dependence of Dynamic Flow Stress Considering Viscous Drag for 6061 Aluminum Alloy at Very High Strain Rates
著者
e-Rad 研究者番号
20120818
著者名
崎野, 清憲
著者名
SAKINO, Kiyotaka
言語
jpn
出版者
社団法人日本材料学会
雑誌名
材料
材料
号
12
開始ページ
1301
終了ページ
1306
発行年
2005-12
キーワード
6061 Aluminum alloy
High strain rate test
Strain rate dependence of flow stress
Thermally activated process
Viscous drag
Phonon
Transitionn in rate controlling machanism
Mobile dislocation density
抄録
In the previous paper, in order to evaluate the strain rate dependence of the dynamic flow stress of aluminum alloys, 6061-O and -T6, high strain rate tests were performed at strain rates ranging from 1×10^3_<s^<-1>> to 3×10^4_<s^<-1>>, and strain rate reduction tests were also conducted in the strain rate range from about 1×10^4_<s^<-1>> to 2×10^4_<s^<-1>>, which is the strain rate range before reduction. A steep increase in the flow stress was observed for 6061-0 at the strain rate of about 5×10^3_<s^<-1>>. The above phenomenon, however, was not observed for 6061-T6 in the strain rate range where the strain rate reduction tests were conducted and also the strain rate dependence of the flow stress was negligibly small. In this paper, to clarify the difference between the above-mentioned phenomenon for 6061-0 and -T6, a simplified model for dislocation kinetics under dynamic plastic deformation is used which can represent a transition in the rate controlling mechanism of dislocation motion from a thermally activated process to a viscous drag. The equation derived from the kinetic model reveals that the steep increase in the flow stress of 6061-0 observed at the strain rate of about 5×10^3_<s^<-1>> is attributed to the rate dependence of the viscous drag on the dislocation motion and furthermore, the increase in the mobile dislocation density lowers a velocity of moving dislocations and shifts the transition region, or the strain rates in which the steep increase in the flow stress becomes to appear, to the higher strain rate side. It is expected that the flow stress of 6061-T6 increases abruptly in the strain rate region above about 2×10^4_<s^<-1>>.
権利
Copyright (C) 社団法人日本材料学会
本文データは学協会の許諾に基づきCiNiiから複製したものである
資源タイプ
Article
インデックス
資料タイプ別
 > 
学術雑誌論文
 > 
自然科学
301 学術雑誌論文
 > 
自然科学
ホームへ戻る